INSTALLATION AND CARE GUIDE 40” VENTO VERTICAL WALL CABINET E097014
VENTO 40” Vertical Wall Cabinet Model : E097014 Designed By: PININFARINA | ITALY PRE-INSTALLATION Tools Required Materials Included 4 1 long screws set of wall cleats Materials Required 2 2x4 beam cut to size 1 INSTALLATION SHEET ronbow.eu | ronbow.
VENTO 40” Vertical Wall Cabinet Model : E097014 Designed By: PININFARINA | ITALY INSTALLATION Step 1: Figure 1. Determine the ideal location of your new wall cabinet. NOTE: The location should have at least 2 studs available. Front notch the studs to fit 2x4 beams that will provide stability for the wall cleats. 29-3/4” (75.5cm) Step 2: Drill pilot holes where the top wall cleat will go. Measure 29-3/4” (75.
VENTO 40” Vertical Wall Cabinet Model : E097014 Designed By: PININFARINA | ITALY ADJUST DOOR HINGE Side to Side Figure 3. Locate the screw nearest the hinge cup and rotate clockwise or counterclockwise to move the door from side to side. Side See Figure 3. Front to Back Figure 4. Locate the screw furthest away from the hinge cup and turn the screw clockwise or counter-clockwise to move the door from front to back. See Figure 4. Depth Top to Bottom Figure 5.
VENTO 40” Vertical Wall Cabinet Model : E097014 Designed By: PININFARINA | ITALY PRODUCT CARE AND MAINTENANCE The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to protect against normal home use. With proper care, your product will provide years of use and beauty in your home. General Care Tips • Install 2x6 backing material behind the finish wall to properly secure the vanity.
161019 40650 Encyclopedia Circle T 510.713.1188 Fremont, CA 94538 F 510.657.9388 ronbow.eu | ronbow.
