Installation & Assembly

PURE 57” Tall Wall Cabinet
Model :
E076115
Designed By: ALEXANDER ZHUKOVSKY | RUSSIA
REV. 160810ronbow.eu | ronbow.comINSTALLATION SHEET
2
Figure 1.
Step 2:
Front notch the studs to fit the
2x4 beam.
Each beam center to center should be
44-3/4” apart.
Step 3:
Place each wall bracket at the
desired location and drill pilot holes
where the bolts will be used to secure
the brackets.
Step 4:
Secure the cleat to the wall using the
long screws provided.
Verify the wall cleats are level.
INSTALLATION
Step 1:
Determine the ideal location of your
new wall cabinet.
Check if the location has at least two
studs for the 2x4 horizontal beams to
sit in place.
Figure 2.
See Figure 1.
See Figure 2.
44-3/4” (113.5cm)
2x4 beam
2x4 beam
44-3/4” (113.5cm)