Installation guide

Straight power cord Looped power cord
2=
I
I
Straight power cord
Remove power plug and yellow strap from machine base to
release the rear leveling system.
Firmly grasp the power cord and pull to completely remove
the power cord, cord restraint, and pin from the rear panel.
3. Confirm that the power cord restraint (A), and pin (B) are
removed,
B
A. Power cord restraint B. Pin
4. To remove the power cord from the cord restraint, push the
power cord in, press TAB, and then pull the power cord out.
Looped power cord
Firmly grasp the yellow shipping strap and pull until both ends
are completely removed from washer.
J
2. Check that two (2) cotter pins were removed with the shipping
strap.