Installation manual Dimensions ; D17" HI5" 14 Bull Type : B12 bulb not included Weight ; 8 LBS Think you for choosing world famous brand chandelier; We are member designing's and craftsmen intend 1o give s professional bright on lighting design & product quality, Pronto and efficient services sre out priority. We enclosed detail instructions on how 1o install your chandelier properly.
DIMINISH" LA SAFETY Warning: MAKE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON I8 SHUT OFF BY BOTHER REMOVING THE FUSE OR TURNING OFF THE CIRCUIT BREAKER. CAUTION =~ Before assembling the lighting fixture, please read all instructions carefully. «All frame & drywall components sre fragile, please handle with care. = Required] supply eclectic 110 130V/60Hz « Labeled wires are “1.
DITHERS" 14 Step 2 Canopy Installation Instruction L= Hot quite N = Neutral quite "B = Ground quite DIT"HI5"L4 IMPORTANT: Test-sockets with bulb before dressing the fixture, 1 Attach the crossbar to the electrical box, 2. Gasp the lamp wire and ground wire through the loop,canopy ring and center hole of canopy cover. 3. Soreness" nipple into: the crossbar and fasten with hex-nut: 4, Pull wires up through the nipple. 5, Screw loop only onto threaded pipe. 6. Hang the fixture on chain, 7.
DIT"BIS"LA Step 3 Frame Assembly Diagram i) DIT"HI5"L4 Frame Assembly Instructions Installation: Please read all instructions carefully. Before you proceed to install;make sure that the power supply iy turned offhand renaming off until installation is complete. Please note that each part has been assigned & mumbler, Please process in & numerical order, 1, Hang the chain (01) on the selling, 2. Hang the lamp body (02) on the chain (01), 3.
DIT"BIS"LA Step 4 Crystal Dressing Diagram DITHERS" 14 Congratulations ! You are now done installing your fixture. Sit back and admire each crystal as it will become the statement piece for your roundhouse, If you require any additional assistance, please contact us Thank you.
DITCH" 14 Cleaning and Maintenance of Chandelier Frame The finish on our chandelier frames and fixture frames is protected by a.durable coating of lacquer. To clean, use clean soft, dry cloth.Do not use any metal polishes, cleaners, abrasives or any substance which could remove hie protective finish, Failures 1o follow these instructions automatically voids the guarantee.
DITTOS L4 Returns and Conditions of Warranty Returns mints be pres authorized by contacting out custom service department st the address on the reverse side. Returns will only be accepted with a written return merchandise authorization and tetanus shipping charges per-paid, We reserved the tight to inspect all returned merchandise to filly determine the nature of any defect.