Instruction manual

UltraVista Plus Installation and Operations Manual 9
DVI-D Input section
The DVI-D Input group displays the current DVI mode that is being captured
(if any) and the preferred mode that has been programmed into the
UltraVista Plus’s EDID. Use the Modify button to update the EDID. The
small square to the left of the current input resolution indicates whether the
UltraVista Plus has genlocked to the input source.
Green – The outputs are genlocked to the input dot clock and vertical sync
Red – The outputs are not genlocked
To change the timings of the input EDID click on the Modify button. The
following dialog window will display. From this window you can modify the
input EDID preferred mode timing standard, the display mode, and detailed
timing.