Integrated DVD/CD/MP3 Player
CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 The Player......................................................................................................6 Remote Control.............................................................................................7 Location and Function of Keys............................
NOTICES Use the Proper Power Supply This product is designed to operate with a 12 volt DC, negative ground battery system (the regular system in a North American car). Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction to the DVD mechanism in this unit. Use Rosen Authorized Dealers Do not attempt to disassemble or adjust this precision product. Please refer to www.rosenentertainment.
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF VIEWED DIRECTLY. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player Label side up DVD 12 cm disc Video CD 12 cm disc Do not touch the underside of the disc CD 12 cm disc MP3 12 cm disc Do not bend Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation. • Do not place stickers or make scratches on discs. • Do not warp discs. • A disc should always be kept in its case when not in use to prevent from damaging. • Do not place discs in the following places: 1. Direct sunlight 2.
THE PLAYER 7 12 11 10 2 1 4 6 5 9 3 8 1. 2. 3. 4. 5. 6. 7. 8. Speaker Enable Switch 9. AV IN Interface 10. Monitor release Button 11. TFT Color Monitor 12.
REMOTE CONTROL LOCATION AND FUNCTION KEYS 1 10 2 11 21 3 12 DISPALY MODE 4 DISC ZOOM 5 6 13 14 MODE INFO EJECT 15 SUB TITLE 16 RANDOM 17 22 7 8 ENTER DISC MENU SETUP 18 1 2 3 REPEAT 19 4 5 6 DISPLAY ADJUST 20 7 8 9 0 9 7
REMOTE CONTROL 1. 2. 3. / 4. 5. 6. MODE 7. / , / 8. SETUP 9. 0-9 10. 11. 12. DISPLAY MODE Press it to pause playback. Press it to turn the unit ON or OFF. Press to skip to the next track & press to skip back one track. Press it to enable or disable sound through the car radio. Press to mute the sound. Changing between DVD mode and AUX mode. Cursor buttons. Display the SETUP menu. Numeric buttons Press it to stop playback. Press to play the disc.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented as indicated. 3. Close the cover Battery: one button cell lithium battery, CR2025. Using the Remote Control Point the remote control towards the base of the unit. Operation angle: About ± 30 degrees in each the direction of the base of the unit.
OPERATION FOR VCD/CD: Press the REPEAT button to select repeat mode as follow. BASIC PLAY STOPPING PLAY - Briefly press the (Stop) button to stop the unit playback, when the (Play) button is pressed, normal playback will continue. - Press (Stop) button twice to stop the playback and go back to initial Track/Chapter. REP-ONE 2X 4X 6X 8X 1X 2X 3X 4X 2X 4X 6X 8X DISC MENU Pressing the DISC MENU will show the DVD DISC MENU if a DVD is installed.
OPERATION TURNING THE UNIT ON/OFF Press OPEN button on the front panel to release and turn on the monitor. ON-SCREEN DISPLAY FUNCTION Press the INFO button during playback to display the contents of the current disc on the screen. Example: FM TRANSMITTER FUNCTION Press button on the front panel or on the remote control to turn the FM TRANSMITTER ON or OFF.
OPERATION (2) Press INFO for the second time: MP3 (When set to NO MENU in SMART NAV item): (1) Press INFO for the first time: SINGLE REMAIN 00:03:15 CHAPTER ELASPED 00:00:25 (3) Press INFO for the third time: TRACK : 01/123 TOTAL ELAPSED 00:00:25 (2) Press INFO for the second time: CHAPTER REMAIN 00:04:25 (4) Press INFO for the fourth time: TOTAL REMAIN TRACK : 01/123 00:40:35 (3) Press INFO for the third time: The message on the screen will be cleared.
OPERATION MP3 DISC PLAY MP3 disc is playing as the format of FOLDER. For example: SMART NAVI ROOT CD01 MP3 001 PLUMT CD02 MP3 002 RZID CD03 MP3 003 ASCIS CD04 MP3 004 DCYI CD05 MP3 005 BFZ PLAY MODE DISC In stop mode, use / , / on the remote control to select the item or folder (such as CD01, CD02...), and press ENTER button on the remote control to confirm, then select the desired track (such as 001 PLUMT, 002 RZID...) on the current folder to play.
SETUP GENERAL SETUP INITIAL SETUP --- GENERAL PAGE --- SETUP MENU --- MAIN PAGE GENERAL SETUP TV DISPLAY NORMAL/PS SPEAKER SETUP PIC MODE NORMAL/LB AUDIO SETUP ANGLE MARK WIDE PREFERENCES OSD LANG CAPTIONS SCR SAVER EXIT SETUP 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player is in STOP mode.) MAIN PAGE TV Screen 2. The initial SETUP menu is displayed. 4:3 Video Material Normal 3. Select the preferred item by using the / buttons.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG ENGLISH CAPTIONS CAPTIONS FRENCH SCR SAVER SCR SAVER GERMAN ITILAIN SPANISH MAIN PAGE MAIN PAGE PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format for image or picture with noise or distortion.
SETUP AUDIO SETUP --- GENERAL PAGE --- --- AUDIO SETUP --- TV DISPLAY PIC MODE ANGLE MARK OP MODE LINE OUT LPCM OUTPUT RF REMOD DYNAMIC OSD LANG CAPTIONS SCR SAVER ON OFF MAIN PAGE MAIN PAGE SCREER SAVER setup Select the SCR SAVER ON/OFF. OP MODE - LINE OUT: Line out mode, with digital dialog normalization. - RF REMOD: RF remodulation mode, with heavy compression and digital dialog normalization. It is recommended to select LINE OUT mode.
SETUP --- AUDIO SETUP --- --- PREFERENCES PAGE --- OP MODE TV TYPE FULL LPCM OUTPUT DYNAMIC AUDIO ENGLISH 6/8 SUBTITLE FRENCH 4/8 DISC MENU SPANISH PARENTAL CHINESE PASSWORD JAPANESE DEFAULTS GERMAN SMART NAV ITALIAN 2/8 OFF MAIN PAGE MAIN PAGE DYNAMIC Range Control Select DYNAMIC and adjust the dynamic range of a Dobly Digital encoded program. There are 8 steps between full compression and off compression.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --TV TYPE TV TYPE AUDIO AUDIO SUBTITLE SUBTITLE DISC MENU ENGLISH DISC MENU PARENTAL FRENCH PARENTAL PASSWORD SPANISH PASSWORD DEFAULTS CHINESE DEFAULTS SMART NAV JAPANESE SMART NAV CHANGE GERMAN MAIN PAGE MAIN PAGE ITALIAN PASSWORD Select CHANGE and press ENTER button. Type the old password (The initial factory code is 3308) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.
SETUP --- PREFERENCES PAGE --- DEFAULTS TABLE General Setup TV Display TV TYPE Normal/PS AUDIO PIC Mode AUTO SUBTITLE Angle Mark ON OSD Language English DISC MENU PARENTAL PASSWORD DEFAULTS NO MENU SMART NAV WITH MENU Captions ON SCR Saver OFF Speaker Setup Downmix Stereo Audio Setup OP Mode Line Out LPCM Output LPCM 96K Dynamic MAIN PAGE Preferences TV Type SMART NAV If selected WITH MENU mode, when playing an MP3 disc, the smart navigation menu will appear on the screen, then the
INSTALLATION Fig. 1 Mounting Bracket(A) Tapping Screw (M4x10) Bracket Ring Base DVD Deck Mounting Bolt (M4.0 x 20) Fig. 2 1. Determine the mounting location and drill four mounting holes on the ceiling (See Fig.1). 2. Attach the mounting bracket (A) to the mounting holes on the ceiling with screws matching with the screw holes on the bracket (A). 3. Install the ring to the DVD unit with screws.
ELECTRICAL CONNECTION VIDEO IN (YELLOW) (25CM) AV IN (2) CABLE (BLACK) 21 (1M) GREEN or PURPLE POSITIVE TRIGGER (PURPLE) (35CM) NEGATIVE TRIGGER (GREEN) GROUND (BLACK) ACC+ (RED) (30CM) AUDIO IN (R) (RED) AUDIO IN (L) (WHITE) (30CM) (25CM) AV OUTPUT CABLE (BLACK) (25CM) VIDEO OUTPUT (YELLOW) (6M) (5M) AUDIO OUTPUT (L) (WHITE) BATTERY (YELLOW) AUDIO OUTPUT (R) (RED) POWER CONNECTION DOME LIGHTS FMM GROUND ( WHITE W/BLACK STRIPE) AUDIO (R) (RED) AUDIO (L) (WHITE) FMM 12V (BLUE) (3M) FMM
REPLACING THE CAR DOME LAMP There are two car dome lamps on the DVD unit. Follow the directions shown below for a new lamp changing. 1. Be sure the lamp is off. Push back the lamp cover and open it. 2. Remove and discard the old lamp. 3. Install a new bulb. 4. Close the cover. Car dome lamp Car dome lamp Bulb Bulb Specification Diameter: ø8mm Length: 28mm Voltage Spec.
TROUBLE SHOOTING THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL • Aim the remote control directly at the sensor on the front of the player. • Avoid all obstacles which may interfere with the signal path. • Inspect or replace the remote control batteries. If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will void the warranty.
SPECIFICATIONS Supply Voltage ground Current Consumption Signal System Discs Played Operating temp : 12V DC (11V-15V), test voltage 14.4V, negative : Less than 2A : Compositive video 1.0Vp-p 75Ω : (1) 5” (12 cm) DVD-VIDEO Disc (2) Compact Disc (CD-DA/CD-R/CD-RW/MP3) (3) 5” (12cm) VIDEO CD : O˚C to +50˚C Note: Specifications and design are subject to modification, without notice, due to improvements in technology.
