Operation Manual

- 19 -
Parts list
NO. DESCRIPTION QTY NO. DESCRIPTION QTY
1 Main frame 1 33 Hex bolt M10X45 4
2 Handlebar post 1 34 Flat washer d10X1.5 6
3 Front stabilizer 1 35 Nylon nut M10 6
4 Rear stabilizer 1 36 Nut cap S16 4
5 L/R Pedal support (L/R) 1pr. 37 Hex bolt M10X50 2
6 L/R Swing bar(L/R) 1pr.
38 L/R Pedal locking bolt (L/R) 1pr.
7 L/R Handlebar (L/R) 1pr. 39 Axle bushing Ø24 X20XØ16.1 4
8 Armrest 1 40 L/R Connecting joint (L/R) 1pr.
9 Computer 1 41 Spring washer Ø13 XB2 2
10 L/R Pedal (L/R) 1pr. 42 L/R Nylon nut (L/R) 1pr.
11 Front end cap 2 43 Nut cap S19 2
12 Carriage bolt M10X57 4 44 Arc washer Ø20 Xd8X2XR16 4
13 Arc washer Ø10 X1.5XØ25XR28 4 45 Carriage bolt M8X40 4
14 Acorn nut M10 4 46 Mushroom end cap 2
15 Rear end cap 2 47 Handlebar foam grip 2
16 Allen screw M8X16 4 48 Armrest foam grip 2
17 Tension controller 1 49 Round end cap Ø25X1.5 2
18 Extension wire 1 50 Pulse sensor wire 2
19 Tension cable 1 51 Hex bolt M8X30 2
20 Sensor wire 1 52 Spring washer D8 4
21 Cross screw M5X45 1 53 Handlebar chuck cover 1
22 Crank 1 54 Flat washer D4 2
23 Nut cap S14 4 55 Cross screw M4X12 2
24 Hex bolt M8X15 2 56 Arc washer Ø20Xd8.5XR25 4
25 Flat washer Ø8.2XØ32 X2 2 57 Nut cap S13 2
26 Axle bushing Ø32 X2.5 4 58 Acorn nut M8 4
27 Long axle 1 59 Flat washer D5 1
28 Round end cap Ø28 X1.5 2 60 Tension controller cover 1
29 Square end cap 40X25X1.5 4 61 Metal bushing Ø14X10XØ10.1 4
30 Hex bolt M8X55 2 62 Waveform washer D17X0.3 2
31 Flat washer d8 X1.5 2 63 Crossing tapping screw ST3X10 2
32 Nylon nut M8 2 64 Waveform washer Ø20XØ28 X0.3 2