Operation Manual

- 21 -
Step D:
Attach the Pedals (9L/R) to the Crank (10) respectively,
viewed from the rider’s seated position. And then
secured with the Nylon nuts (29L/R) accordingly as
shown.
Note:
Both pedals are labeled L FOR LEFT and R FOR
RIGHT.
To tighten
turn the left pedal COUNTERCLOCKWISE and the
right pedal CLOCKWISE.
Please make sure the Pedals were Securely Fastened
before getting on the Bike.
Operating instructions
Leveling the Bike
This bike can be leveled to compensate for uneven surfaces.
To level the bike, please raise or lower four leveler feet
located on the underside of the front and rear stabilizers
Resistance Adjustment
Pedaling resistance is controlled by the tension control
knob. To increase resistance, turn the tension control knob
clockwise (+). To decrease resistance, turn the tension
control knob counterclockwise (-). Resistance adjustment
can be easily made at any time. Emergency brake is also
equipped in this machines, merely pulling up the leveler,
you can stop the transmission immediately.