Operation Manual

GB-29

ENGLISH

Assembly

1. Place the counter plate (95) into the underside of

the rail (19) as illustrated (see Fig. 1).

2. Screw the angle bracket (13) to the rail with three

screws (87), three spring clips (74) and the counter

plate (see Fig. 1).

3. Push the seat (25) into the the guide of the rail (see

Fig. 2).

4. Screw the rear dampers (85 + 61) into the rail (see

Fig. 2).

5. Likewise, mount the front dampers into the rail.

6. Attach the rear cover with four screws (72), four

spring clips (86) and four washers (81) as illustrated

(see Fig. 3).

7. Place the pre-assembled rail in the main frame (22)

as illustrated (see Fig. 4).

8. Press down the locking screw (17) and tighten it

clock-wise up to the stop (see Fig. 4).

9. Now screw the rail together with the main frame as

illustrated. Use the screw (84), two washers (78) and

the cap nut (55).

WARNING

1. Place the machine and the rear foot (5) on the ﬂ oor

as illustrated.

2. Screw the rear foot (5) together with the main frame

(22). Use the two Allen screws (90), two cap nuts

(75), two spring clips (74) and two washers (80) for

this.

WARNING

STEP 1

STEP 2

REX_Trainer_PX400E_13.indd GB-29REX_Trainer_PX400E_13.indd GB-29 10.05.13 12:5910.05.13 12:59