Operation Manual

GB-30

Assembly

STEP 3

STEP 4

1. Mount both treads (10) to the main frame as illustra-

ted. Here, use two screws (91), two washers (77), the

pin (16) as well as both treads (10).

WARNING

1. Join the upper and lower computer cables in the cen-

tre of the frame tube as illustrated.

2. Mount the frame tube (2) to the main frame using two

screws (87), two spring clips (74) and two washers

(80).

3. Fasten the drink bottle holder (3) to the frame tube

(2) using two screws (14).

4. Push the drink bottle (98) into the holder.

5. Connect the computer cables to the display (1) (see

Fig. (b)).

6. Fasten the display (1) to the designated retaining

plate using four screws (92).

7. Insert the plug of the mains adapter (99) into the

socket at the left front side of the machine.

8. Then insert the mains adapter (99) into the power

outlet. The machine is ready to operate.

WARNING

REX_Trainer_PX400E_13.indd GB-30REX_Trainer_PX400E_13.indd GB-30 10.05.13 13:0010.05.13 13:00