Operation Manual

GB-31
ENGLISH
Folding mechanism/Transport
Folding together
1. Release the locking screw until it snaps back audibly (see Fig. A).
2. Pull back the rail briefl y and unfold it until it engages (see Fig. B).
3. Make sure that the rail is engaged securely (see Fig. C).
Opening out
1. Pull up the rail and then open it out downwards.
2. Push the rail up to the stop in the direction of the main frame.
3. Press down the locking screw and tighten it clock-wise up to the stop.
Transport
To shift the machine, it must be fi rst folded together (see “Folding together”). Make sure that the rail is engaged securely.
Slowly tilt the machine back until it stands on the transport rolls. You may now carefully move the machine to the desired
location. When choosing a suitable location, please observe the safety instructions at the beginning of these operating in-
structions.
Folding mechanism
REX_Trainer_PX400E_13.indd GB-31REX_Trainer_PX400E_13.indd GB-31 10.05.13 13:0010.05.13 13:00