User manual

9
The soldering iron is designed for joining metallic workpieces by means of a suitable molten solder.
It is particularly suitable for soldering joints on electrical and electronic assemblies and circuit
boards; for model making and for radio and/or telecommunications work. Almost all metals and
metal alloys can be soldered, especially brass, copper and iron etc.
This soldering iron is design for soft soldering (soldering at a temperature < 450°C).
Any other use of the product is expressly forbidden and counts as misuse.
The soldering iron is designed for DIY use only.
Use of the soldering iron for commercial purposes counts as misuse.
SCOPE OF USE
FEATURES
1 Handle
2 Soldering stand
3 Soldering iron holder
4 Heating element
5 Cleaning sponge
6 Soldering tip
7 Adjustable workpiece
holders
8 Tip fixing screw
9 Accessory compartment
10 Mains cable with plug
TECHNICAL SPECIFICATIONS
Rated voltage 230 V~ / 50 Hz
Rated power: 30 W
Soldering tip temperature 300°C approx.
Pre-heat time: approx. 3– 5 minutes
Solder wire ø max. 2 mm
1
2
9
10
5
6
7
7
8
4
3
GB
1500000041_Anleitung 07.09.2011 14:14 Uhr Seite 9