User guide

INSTALLATION INSTRUCTIONS
1. Using a 10mm socket remove the bolt from the cup holder See Photo 1, open the center console and remove the
two bolts in the bottom. See Photo 2.
2. Pull up on the shifter boot to gain access to the console mounting bolts. Remove the bolt with a 10mm socket.
See Photo 3.
3. Next pull up the emergency brake and the transfer case shifter, this will allow for the console to be removed.
4. Push the passenger side seat forward to allow the two side bolts to be removed from the console using a 10mm
socket. See Photo 4.
5. You can now pick up on the console and work the console over the shifters. See Photo 5. After the console
clears the shifters you will have to push in the tabs releasing the 12V power supply out of the console. See Photo
6. Next turn the 12V power supply sideways and work it through the hole in the console.
Photo 4 Photo 3
Photo 2
Photo 6 Photo 5
Photo 1