User guide

6. Next remove the 4 bolts hold on the lower shifter boot with a 8mm socket. See Photo 7.
7. Using a 8mm socket remove the 9 bolts holding the shifter plate to the transmission tunnel. See Photo 8.
8. Next remove the 4 bolts holding transfer case shifter gate with a 8mm socket. See Photo 9.
9. Pull up on the shifter and remove the shifter from the lower gear selector. See Photo 10. If the gear shifter is fro-
zen because of rust skip this step and then remove shifter after the assembly is pulled out of the transmission.
10. Remove the dust boot from the top of the transmission. See Photo 11.
11. Push down on the spring loaded cap and turn counter clockwise to unlock, remove the cap, spring, and lower
gear selector from the transmission. See Photo 12. If you could not remove the shifter from the lower gear selec-
tor now is the time to put the assembly in a vise to pull apart the shifter.
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Photo 7