User Manual

6
OPERATION
ON/OFF Power selection
SPEED selection
(High/Medium/ Low)
Timer setting (up to 8H)
Mode selection (Night/ Nature/
Normal)
SLEEP MODE
OUTDOOR MODE
NATURAL
Operate the fan and choose the
speed you require using the
buttons on the control panel:
•
START
• TIMER (up to 8H)
• MODE
• SPEED (High/ Medium/ Low)
The control panel has four buttons which are used to start your appliance and select the ventilation speed. You
can select your preferred ventilation setting by pressing“MODE” button.
In OUTDOOR Mode, you can select your preferred fan speed settingby pressing the SPEED selector and choosing.
(High/ Medium/ Low)
In SLEEP or NATURAL mode, the fan speed is pre-programed to provide maximum comfort.
Turn the appliance o by pressing button
either on the control panel or the remote control.
By pressing
button, you can set a timer if needed. The LED lights will indicate the duration of the timer you
are setting.
This fan has oscillating fan head which is set by a manual stopper control on the top of fan head.
IMPORTANT: You are advised to unplug the appliance when not in use.
USER SERVICING INSTRUCTIONS
Ground Fault Circuit Interrupter (GFCI) Fused Plug
This plug is a safety feature. It contains a ground fault circuit interrupter (GFCI) and a fuse that should not be
removed. Discard product if the attachment plug is damaged.
To reduce the risk of re, electric shock and personal injury, do not remove, replace, repair or tamper with the
originally supplied plug.
If the fan does not function properly, it may be due to the safety device incorporated in this plug.
If the fuse fails, it is generally due to a short circuit or circuit overload. Replace the fuse as per the instructions
below.
If the replacement fuse fails, immediately unplug the unit and contact Rowenta consumer services for assistance.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this
plug is intended to t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the
plug.
If it still does not t, contact a qualied electrician. Do not attempt to defeat this safety feature.