Warranty

Limitations:
Royal’s Warranties cover only the manufacturing defects identified above and
do not provide protection against any damage caused by other factors
including but not limited to:
• Normal weathering (as defined below)
• Uneven exposure to sunlight
• Misuse or negligence
• Failure to provide reasonable maintenance to prevent accumulation of dirt,
mildew, staining materials, pollution, exposure to chemical Products or
incompatible cleaners
• Alterations like applying incompatible coatings, stains or varnishes (see
technical information for compatible coatings if any)
• Improper handling or storage
• Defects in the wall structure (materials or construction) on which Royal’s
Products are installed which cause failure, such as movement, cracking or
settling of the wall, foundation or building
• Deformation caused by high heat sources including but not limited to grills,
fire pits, foil sheathing, low e-glass windows and low e-glass doors.
• Damage caused by animals or insects
• Impact of foreign objects, hail, lightning, fire, hurricane, tornadoes, or other
Acts of God
• Vandalism, intentional damage, riot or insurrection
Normal Weathering is defined as even exposure to ultraviolet sunlight and
extremes of weather and atmosphere which will cause any colored or painted
surface to fade, darken, chalk or acquire a surface accumulation of dirt or
stains. The severity of these conditions depends on air quality, the geographic
location of the property and other local conditions over which Royal has no
control. Royal shall determine whether the siding is suffering from normal
weathering (which is not covered by Warranty). Product is weathering
abnormally if it evidences a change in color of more than the requisite Hunter
Units as calculated according to ASTM D2244, as outlined in the chart herein.
Product(s) must have been exposed to the same weathering conditions and
not partially covered by other materials such as shutters, awnings, porticos, or
other materials.
Uneven exposure to sunlight is not covered under the terms of this Warranty.
Warranty Claims Process
The claimant shall provide a written description of the claimed manufacturing
defect together with original proof of purchase within 30 days of noticing the
defect to the following address:
Royal Building Products 91, Royal Group Crescent Woodbridge, Ontario
Canada L4H 1X9
FOR INQUIRIES AND CLAIM SUBMISSIONS, PLEASE VISIT
WWW.RBPWARRANTY.COM
The claimant must provide date of installation and proof of property ownership.
The claimant may be required to submit a sample of the defective materials for
analysis. This sample may need to be removed from the property at the
property owner’s expense. Royal will analyze the material claimed to be
defective and determine the validity of the claim.
Use and Care:
Your Royal Product is a low maintenance Product. Please refer to our Use and
Care brochure for the best way to keep your Royal Product looking great.
Some States do not allow limitations on how long an implied Warranty lasts,so
the foregoing limitation may not apply to you.
Some States do not allow the exclusion or limitation of incidental or conse-
quential damages, so the above limitation or exclusion may not apply to you