Technical data

Unpacking and assembling

2 Unpacking and assembling

2.1 Unpacking 1. Unpack the appliance and all its accessories.

2. Check the contents for completeness and possible

damages. Information regarding the scope of delivery

ZPage 24, "Overview of your Centrixx TS".

2.2 Assembly

1. Push the end of the suction hose (Fig. 2/1) into the

socket opening (Fig. 2/2) of the cylinder vacuum

cleaner until the lock audibly clicks into place. Make

sure that the release button (Fig. 2/3) points down as

illustrated.

2. Insert the handle (Fig. 3/1) into the upper end of the

telescopic tube (Fig. 3/2).

3. Attach the floor nozzle (Fig. 3/3) to the bottom end of

the telescopic tube (Fig. 3/4).

ATTENTION:

Always transport/send the appliance in its original

packaging to avoid transport damages. Keep the

packaging for such an event.

Dispose of no longer needed packaging material

according to the applicable regulations of your country.

NOTE:

Immediately contact your dealer if you have found

damage resulting from transport.

WARNING:

Danger of injury! Only assemble the appliance when it is

not connected to the mains. Otherwise, the appliance

could be switched on by accident.

NOTE:

When attaching the floor nozzle, you might have to push

a bit harder.

Fig. 2

Fig. 3

02_Centrixx TS_gb.book Seite 29 Donnerstag, 2. April 2009 12:38 12