Technical data

30
Unpacking and assembling
4. Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) down (Fig. 4/a).
Then extend the telescopic tube to the desired length
(Fig. 4/b). Let go of the release catch while pulling until
it locks in place. You will hear a distinct click.
5. Push the accessory holder (Fig. 5/3) onto the telescopic
tube (Fig. 5/1) below the telescopic tube lock (Fig. 5/2).
Then push the furniture brush (Fig. 5/4) and the crevice
nozzle (Fig. 5/5) onto the holder.
Your cylinder vacuum cleaner is now ready for use.
2.3 Using further nozzles
(accessories)
Besides the floor nozzle (Fig. 1/1) you just attached, you
may extend the functions of your cylinder vacuum cleaner
with other nozzles.
 The crevice nozzle, the furniture brush and the
upholstery nozzle are included as accessories in the
scope of delivery. They can be placed on the accessory
holder (Fig. 5/3) when not in use.
- Crevice nozzle (Fig. 6/1)
Use this to vacuum dust from hard to reach places.
- Furniture brush (Fig. 6/2)
Use this to remove dust from objects with delicate
surfaces (e.g. cupboards and tables).
Fig. 4
b
a
1
Fig. 5
3
1
2
5
4
Fig. 6
1
2
02_Centrixx TS_gb.book Seite 30 Donnerstag, 2. April 2009 12:38 12