Technical data

Unpacking and assembling

 Optionally available are:

- Turbo brush (Fig. 7/1)

For thoroughly deep cleaning of carpets with the

revolving brush head.

- Parquet brush (Fig. 7/2)

For vacuuming especially delicate surfaces (e. g.

parquet, laminate) with long, soft bristles.

Proceed as follows to attach the nozzles:

1. Switch off the vacuum cleaner and pull the plug from the

mains socket.

2. Remove the nozzle from the telescopic tube (Fig. 8/1).

3. Attach the desired nozzle to the bottom end of the

telescopic tube (Fig. 8/1) or if necessary directly to the

handle (Fig. 1/6).

4. If possible, store nozzles not in use on the accessory

holder (Fig. 1/22). Keep the other nozzles safe and

inaccessible to children.

NOTE:

The brush rotating at high speed causes a loud noise

during operation.

WARNING:

Danger of injury! Only attach nozzles when the vacuum

cleaner is not connected to the mains. The appliance

could be switched on by accident.

ATTENTION:

Use only intact nozzles. Damaged nozzles may scratch

or damage surfaces and objects.

ATTENTION:

Using the cylinder vacuum cleaner without a nozzle

attached increases the danger of accidentally sucking in

objects.

Fig. 7

Fig. 8

02_Centrixx TS_gb.book Seite 31 Donnerstag, 2. April 2009 12:38 12