Technical data

Operation

3.4 Emptying the dust

container

 Empty the dust container at the latest when the "Max"

mark (Fig. 16/1) has been reached or when the vacuum

cleaner is losing suction power.

1. Press the release buttons and open the housing cover

(Fig. 16).

2. Turn the dust container a little to the right (Fig. 16) to

unlock it.

3. Then lift the dust container up out of the cylinder

vacuum cleaner.

4. Hold the dust container low over a dustbin to empty it.

5. Push the release button (Fig. 17/1). The bottom opens

and the dust falls into the dustbin.

6. Carefully tap loose the remaining dust. If necessary,

wipe the dust container with a dry cloth.

7. Close the dust compartment bottom. It snaps into place.

8. Push the dust container back into the cylinder vacuum

cleaner. Lock it with a short turn to the left.

9. Close the housing cover. It snaps shut.

ATTENTION:

Before you clean the dust container, switch off the

appliance and remove the mains plug. Otherwise,

sucked-in dust might destroy the appliance.

NOTE:

You can dispose of the dust with your regular domestic

trash if it contains no prohibited waste materials.

Fig. 16

Fig. 17

02_Centrixx TS_gb.book Seite 35 Donnerstag, 2. April 2009 12:38 12