Technical data

36
Cleaning and care
4 Cleaning and care
4.1 Overview of the filters Your cylinder vacuum cleaner is equipped with the
following filters:
- Central laminar filter (Fig. 18/1)
Dust and dirt particles can become attached to the
central laminar filter and reduce the airflow.
Cleaning: To maintain suction performance, clean
the filter after each vacuuming session (see
ZChapter 4.2, "Cleaning or changing the central
laminar filter and motor protection filter.").
If the central laminar filter is very dirty or it is no longer
possible to clean it, replace it with a new filter
(ZChapter 4.2, "Cleaning or changing the central
laminar filter and motor protection filter.").
- Motor protection filter (Fig. 18/2)
Checking: Check the motor protection filter every time
you empty the dust container.
Cleaning: If the filter is dirty, clean or exchange it as
described (ZChapter 4.2, "Cleaning or changing the
central laminar filter and motor protection filter.").
If necessary, replace the filter.
- Hygienic exhaust filter (Fig. 18/3)
Changing: every 6 months (ZChapter 4.3, "Changing
the hygienic exhaust filter")
 The filters can become dirty with time. That's why it is
important to adhere to the above changing intervals.
 Replace a damaged filter as soon as possible.
ATTENTION:
All filters may not be machine-washed or cleaned in a
dishwashing-machine.
Fig. 18
1
2
3
02_Centrixx TS_gb.book Seite 36 Donnerstag, 2. April 2009 12:38 12