Technical data

Cleaning and care

4.2 Cleaning or changing

the central laminar

filter and motor

protection filter.

1. Switch the appliance off and observe the instructions

under ZChapter 3.2, "Switching off and retracting the

power cord.".

2. Empty the dust container, ZChapter 3.4, "Emptying the

dust container".

3. Remove the cover from the dust container by pulling it

off the dust container over a dustbin.

4. Keep holding the cover low over a dustbin. First remove

the filter screen by turning it counter-clockwise off the

cover (Fig. 19).

5. Then twist the central laminar filter off the cover by

turning it counter-clockwise (Fig. 20).

6. For a rough cleaning beat the dirt from both parts by

lightly tapping them from all sides over a dustbin

(Fig. 21).

7. To thoroughly clean the central laminar filter without

water, use the supplied furniture brush as shown

(Fig. 22).

Fig. 19

Fig. 20

Fig. 21

Fig. 22

02_Centrixx TS_gb.book Seite 37 Donnerstag, 2. April 2009 12:38 12