ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSAMBLE Height: 31,73 in Width: 43,3 in Depth: 13,58 in Alto: 80,6 cm Ancho: 110 cm Fondo: 34,5 cm LOT N° REF./SKU.: SL-SB-5 EMERY SIMPLE SIDEBOARD Recibidor Emery For assistance with assembly or customer service, call 1-877-924-2090 (English) Monday-Friday, 8 a.m. to 5 p.m. Mountain Time, North America. Email: customerservice@rstbrands.com or visit our website at www.rstbrands.
! IMPORTANT RECOMMENDATIONS / RECOMENDACIONES IMPORTANTES -The cabinet MUST be used exclusively indoors, do not expose to direct sun. / El mueble debe ser usado únicamente en interiores, no exponer al sol directo. -Do NOT overload the cabinet (see suggested loads), Do not hit or hammer the cabinet (just when indicated). / NO sobrecargar el mueble (ver las cargas sugeridas). No golpear ni martillar el mueble (solo cuando se indique). -Do not drag, lift and move between two people.
INDEX ÍNDICE Assembly Hardware 4 Herrajes para Armado 4 Assembly Parts 5 Piezas de Armado 5 Suggested Loads 6 Cargas Sugeridas 6 Assembly Recommendations 6 Recomendaciones de Ensamble 6 Assembly Steps 7-10 Pasos de Armado 11 Warranty REQUIRED TOOLS* 7-10 Garantía 11 HERRAMIENTAS NECESARIAS* *5/32" wrench or adjustable wrench. *Llave boca fjja de 5/32" o llave de boca ajustable *Not included, and not shown actual size. Page 3 *No incluidas y no se muestran en tamaño real.
ASSEMBLY HARDWARE HERRAJES PARA ARMADO Please check that the hardware content is correct. If any item is missing, please call to our customer service line. Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente.
ASSEMBLY PARTS PIEZAS DE ARMADO A A - x1 Und / Unit + Sideboard Metallic Kit Kit metálico Recibidor Page 5
MAX SUGGESTED LOADS CARGAS MÁXIMAS SUGERIDAS 11lb 5Kg 11lb 5Kg ASSEMBLY RECOMMENDATIONS RECOMENDACIONES DE ENSAMBLE Two people are recommended to assemble the product. Ensamble el mueble entre dos personas. Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the carton box of the product.
1 Install the metallic frames as shown below through the thread screws + Steel nuts. Instale los marcos metálicos como se muestra a continuación mediante los tornillos de rosca + tuercas. *Use 5/32" wrench or adjustable wrench. / *Use llave boca fjja de 5/32" o llave de boca ajustable.
3 Install the two remaining legs./ Instale las otras dos patas. *Use 5/32" wrench or adjustable wrench. / *Use llave boca fjja de 5/32" o llave de boca ajustable. ! Be careful turning over the cabinet. Tenga cuidado al voltear el mueble. Thread Screw + Steel Nut Tornillo redondo de rosca + Tuerca 4 Install the remaining thread screws + Steel nuts. / Instale los demás tornillos de rosca + Tuercas.
5 Install the “A” piece to the metallic kit through the drywall screws. / Instale la pieza “A” al kit metálico mediante los tornillos de ensamble. x16 1/2" Drywall Screw Tornillo de Ensamble 1/2" A ! 6 Be careful turning over the cabinet. Tenga cuidado al voltear el mueble. Verify that all nuts are tight to ensure the stability of the product. / Verifique que todas las tuercas estén bien apretadas para garantizar la estabilidad del producto.
7 ! For the user safety, it is recommended to anchor the cabinet to the wall. Por la seguridad del usuario se recomienda anclar el mueble a la pared. -WARNING! TIPPING HAZARD – Unanchored furniture can tip over -WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. -IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED) -Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit.
WARRANTY POLICY PÓLIZA DE GARANTÍA Welcome to the RST Family Here at RST Brands™ we are committed to your satisfaction by offering you a competitive warranty to ensure all our products are free from defects, in material and workmanship, to the original purchaser for a period of one year from the date of your purchase. How It Works We are happy to furnish a replacement at no cost to you in the case we determine a component to be defective.
