User manual

Page 107

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

The individual elds on this screen are dened as follows:

Field Name Description

OUI-Serial Select whether to use the base MAC address or the serial number of your gateway

when connecting to the ACS.

TR-069 Client Disable/Enable TR-069 client on the CPE.

Inform Interval The frequency (in seconds) with which the CPE (gateway) checks in with the ACS to

sync and exchange data. A typical production environment entails CPEs in the eld

informing to the ACS once/day or every 86,400 seconds.

ACS URL URL for the CPE to connect to the ACS using the CPE WAN Management Protocol.

This parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL

indicates that the ACS supports SSL. The “host” portion of this URL is used by the

CPE for validating the certicate from the ACS when using certicate-based authen-

tication.

ACS User Name User name by which this gateway logs in to the ACS.

ACS Password Password to authenticate the above user name.

WAN Interface used by TR-069 client Choose any WAN, LAN, Loop back or a congured connection to declare how this

gateway will connect to the ACS.

Connection Request Authentication Check this checkbox if your ACS requires authenticated connection requests. Com-

plete the additional credential elds that are exposed.

Use the GetRPCMethods buttons to force the gateway to attempt to sync with the ACS. This will assist you in verifying the TR-069

parameters entered above.