User manual

Page 91

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

Manual Setup

Network Authentication: Mixed WPA2-WPA

The individual elds on this screen are dened as follows:

Field Name Description

Select SSID Select the SSID from the drop-down list for the wireless network to which this secu-

rity conguration will apply.

WPA2 Preauthentication

Network Re-Auth Interval

WPA Group Rekey Interval [1-65535 seconds] The frequency with which the gateway automatically updates the

group key and sends it to connected LAN client devices.

RADIUS Server IP address Enter the IP address for the Remote Authentication Dial In User Service server as-

sociated with your infrastructure.

RADIUS Port Port 1812 for authentication is a standard for RADIUS authentication per the IETF

RFC 2865. Your RADIUS deployment may differ from this. Older servers may use port

1645.

RADIUS Key Enter the encryption key required to authenticate to the Radius Server specied via

the Server IP address above.

WPA/WAPI Encryption [AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES com-

bined with Temporary Key Integrity Protocol (TKIP). This eld has been pre-popu-

lated with the option most complimentary to the Network Authentication selected.

WEP Encryption [Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.

Encryption Strength [128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more

robust option for security.

Current Network Key [1-4] Select which of the four keys from the list is presently in effect.