User manual

Page 92

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

Field Name Description

Network Key 1-4 Enter up to four encryption keys using the on-screen instructions to achieve the de-

sired security strength (128 or 64 bit).

Manual Setup

Network Authentication: Mixed WPA2/WPA-PSK

The individual elds on this screen are dened as follows:

Field Name Description

Select SSID Select the SSID from the drop-down list for the wireless network to which this secu-

rity conguration will apply.

WPA2 Preauthentication When enabled, clients can pre-authenticate with the gateway while still connected

to another AP.

Network Re-Auth Interval [0-2,147,483,647 seconds] The interval that the client must re-authenticate with the

gateway.

WPA Group Rekey Interval [1-65535 seconds] The frequency with which the gateway automatically updates the

group key and sends it to connected LAN client devices.

WPA/WAPI Encryption [AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES com-

bined with Temporary Key Integrity Protocol (TKIP). This eld has been pre-popu-

lated with the option most complimentary to the Network Authentication selected.

WEP Encryption [Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.

Encryption Strength [128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more

robust option for security.

Current Network Key [1-4] Select which of the four keys from the list is presently in effect.

Network Key 1-4 Enter up to four encryption keys using the on-screen instructions to achieve the de-

sired security strength (128 or 64 bit).