Welcome to a world of low power radio modules... Over the years our customers have enjoyed the benefits of using our off-the-shelf low power radio data modules at the heart of their designs. They have recognized the considerable savings that can be made in time and development costs by opting for our high quality, reasonably priced modules, to take care of their RF design requirements.
AM-TX1-4xx Transmitter Module FEATURES • MINIATURE MODULE (7.5 x 11.5 X 4.5mm) • SAW CONTROLLED FREQUENCY STABILITY • NO ADJUSTABLE COMPONENTS. • TRANSMITTING RANGE UP TO 100 METRES. • CMOS/TTL COMPATIBLE INPUT. • CURRENT CONSUMPTION 2.5mA (typ). • SINGLE SUPPLY VOLTAGE 2.5 -12V. • COMPATIBLE WITH AM RECEIVER MODULES.
AM-RT4-xxx AM Transmitter Modules AM-RT5-xxx AM-TX5 FEATURES • • • • • • • • • • • COMPLETE RF TRANSMITTER TRANSMIT RANGE UP TO 70m CMOS/TTL INPUT AVAILABLE IN DIL OR SIL PACKAGE NO ADJUSTABLE COMPONENTS VERY STABLE OPERATING FREQUENCY LOW CURRENT CONSUMPTION (TYP 4mA) LOW SPURIOUS EMISSIONS (-35dBc) WIDE OPERATING VOLTAGE (2-14V) AVAILABLE AS 418 MHz OR 433 MHz COMPATIBLE WITH AM-HRR1, AM-HRR3/6 AND THE AM-RSS2 AM RECEIVER MODULES 17. 78mm Ground Plane View 1mm 2.
TXM-xxx-A/F FM Transmitter Module Versatility combined with ease of use makes the TXM transmitter module a very powerful ingredient in any engineers "cook book". Through the simple addition of power to the modules supply pin, serial data to its data input, and the addition of an appropriate antenna, wire free products ranging from the simplest of remote controls through to complex data acquisition systems can be constructed, all at remarkably low cost.
AM-RRS2-xxx AM SuperHetrodyne Receiver Module FEATURES • • • • • • • • • • COMPACT HYBRID MODULE. CERAMIC SUBSTRATE VERY HIGH FREQUENCY STABILITY SAW FILTER FRONT END. RECEIVING RANGE UP TO 300ft SENSITIVITY TYP -100dBm (2.2µVrms). CMOS/TTL COMPATIBLE OUTPUT. CURRENT CONSUMPTION 3.7mA. SINGLE SUPPLY VOLTAGE 5V. COMPATIBLE WITH AM TRANSMITTERS.
AM-HRR1-xxx AM-HRR3-xxx AM-HRR6-xxx AM SuperRegenerative Receiver Module AM-HRR3 AM-HRR6 FEATURES • • • • • • • • • COMPACT HYBRID MODULE VERY HIGH FREQUENCY STABILITY WITH NO ADJUSTABLE COMPONENTS RECEIVING RANGE UP TO 150 FEET CMOS/TTL COMPATIBLE OUTPUT SINGLE SUPPLY VOLTAGE 5V LOW CURRENT CONSUMPTION: AM-RR6 TYP 0.
SILRX-xxx-A/F FM SuperHeterodyne Receiver Module This range of receiver provides an ideal complement to our FM range of transmitters. All these receivers feature internal data recovery, giving a simple to use logic level data output for direct interfacing to decoding logic or a microcontroller. Besides the logic level data output, the SILRX receivers include a carrier detect (CD) output as well as an analog output.
RXM-xxx-A FM SuperHeterodyne Receiver The RXM range of receivers provides an ideal complement to our TXM transmitter modules. These receiver modules feature internal data recovery, giving a simple to use logic level data output for direct interfacing to decoding logic or a microcontroller.
RTcomTx-RS232 Transmitter and RTcomRx-RS232 Receiver pair • • • • • • • • • • • 2400, 4800 or 9600bps simplex 2-Wire RS232 Interface, TX(Data) and GND, Rx(data) and GND Microcontroller with watchdog Transmission range up to 200metres with 0.25mW ERP Available on 418MHz and 433.92MHz Status LED’s - Power, Comms, Tx/Rx ON 7.
BiM-4xx-F/HP FM Transceiver Module The Radio Transceiver is probably the most versatile of all the Low Power Radio Products. Whenever an application requires two way communication or the acknowledgement of the data transfer, the transceiver provides the obvious wire free solution. For hand held applications such as Electronic Point of Sale (EPOS), bar code reading, human traffic flow monitoring and hand held data terminals, the compact BIM Transceiver is the ideal candidate.
BIM-4xx-F TRANSCEVER MODULE Absolute maximum ratings Supply voltage Vcc, pin 17 All input / output pins Operating temperature Storage temperature -0.1 -0.1 -20°C -40°C to to to to +6 Volts Vcc + 0.1 Volts +55°C +100°C Performance Data ambient temperature: 20°C supply voltage: +5.0 volts, unless noted otherwise Data applied to all frequency versions, except where noted. Parameter Min Typ. Max.
BIM-4xx-F TRANSCEVER MODULE (cont.) Parameter Min Typ. Max. Units Notes Linear drive (4Vp-p, sine) AF response @ -3dB Analog distortion 0.1 - 5 17 10 Khz % - Digital drive Data rate (50:50) Time between transmissions Average Mark:Space ratio Preamble duration (10101010) data delay (TXD to RXD) 25 30 3 - 50 25 40 2000 70 - Kbps µS % mS µS 4 5 6 - Interface levels - inputs TX & RX select V high V low Source current @ V low = 0 Vcc-0.5 0 0.5 Vcc 1 1 Volts Volts mA - Vcc-0.5 0 Vcc 0.
BIM-4xx-RPC Parallel Interface Transceiver Module The RPC is a self-contained plug-on radio port which requires only a simple antenna, 5V supply and a byte-wide I/O port on a host microcontroller (or bi-directional PC port). The module provides all the RF circuits and processor intensive low level packet formatting and packet recovery functions required to inter-connect any number of microcontrollers in a radio network.
BIM-4xx-RS232 Transceiver Module • • • • • • • • • 4,800 to 38,400 bits/s half duplex. 3-Wire RS232 Interface, TX(Data), RX(Data) and Ground RS232 Interface protected to +/-15kV ESD in accordance with EMC requirements Microcontroller with user data EEPROM Automatic Transmission Mode switching upon receipt of serial data from DTE Low profile SMD, LED's and switch design for ease of rear panel mounting. Comprehensive user manual Available on 418MHz and 433.92MHz Wide supply range: 7.
CYPHERNET-xxx-RS232 FM Transceiver Module • • • • • • • • • • • • 4,800 to 19.2Kbps ASCII (half duplex). 2-Wire RS232 Interface, TX(Data), RX(Data) With CD(Carrier Detect) option RS232 Interface protected to +/-15kV ESD in accordance with EMC requirements Automatic power on reset local loop back test for both TX & RX Automatic Transmission Mode switching upon receipt of serial data from DTE 7.5V to 15V dc operation. <35mA .
Cyphernet Radio Transceiver with RS232 Interface and Controller Standard Firmware Description The Cypernet comes complete with an EEPROM held firmware package giving the following operating performance. In standby mode the unit continuously searches the ether for transmissions. On detection of preamble or data the interface signals the host that the channel is busy using the CD line and opens the RX(data) output to the PC. The host can then look at the incoming data and respond as and if required.
In-Circuit Programming Adaptor • • • • • Programs the CYPHERNET and the BIM-xxx-RS232 transceivers in-circuit via PC printer port Resets code protection fuses on the PIC16C84 microcontrollers Supplied with a 9 pin D-type connector ISO Smart Card programming option included Programming Software included The programmer enables the user to replace the firmware supplied with the BIM-4xx-RS232 and the Cyphernet with their own firmware package giving them a totally customized solution to cater for their specifi
RTcom-RS232 • • • • • • • • • • • • Radio Modem Subassembly with RS232 Interface 2400bps to 19.2Kbps half duplex. 3-Wire RS232 Interface, TX(Data), RX(Data) and GND RS232 Interface protected to +/-15kV ESD in accordance with EMC requirements. Microcontroller with watchdog. Automatic Transmission Mode switching upon receipt of serial data from the DTE. Operates from WINDOWS or DOS under terminal mode. Transmission range up to 400ft with 0.25mW ERP Available on 418MHz and 433.92MHz Status LED’s 7.
TXR-464-DTR100 64 Channel Synthesized FM Transceiver The TXR-464-DTR100 is both a high quality and high performance fully Synthesized 64 channel, radio data transceiver specifically tailored and approved to meet the needs of the North American 462.075 - 464.850 & 465.100 - 465.875MHz FCC part 90 bands, high security, EPOS, hand held data terminal, industrial telemetry and telecommand markets.
TXR-2450-RS485 Spread Spectrum Transceiver OVERVIEW The TXR-2450-RS485 is a hyper performance microwave radio data transceiver employing state-of-the-art spread spectrum microwave communication techniques. With a permissible data rate of between 250Kbps and 1Mbps it is an ideal candidate for constructing high speed wire free data networks for applications as diverse as real time industrial processing and monitoring through to WANs Operating on the near globally accepted 2.
The power supply section takes 7-12 V unregulated dc. The code generator produces 16 MHz direct sequence spread spectrum signals, via a modulator in the RF section. The RF section generates frequencies directly in the 2.4 to 2.4835 GHz range to avoid spurious mixing products which are potentially troublesome with upconversion techniques. This reduces the cost as no conversion stages or filters are required.
TXR-2450-RS485 Specifications Parameter Value Frequency Range 2.4 to 2.4835 GHz Conforming to Standard ETS 300 328 Line-of-sight range up to 400m using whip antennas Range in typical office 30 to 50m Bit rates 250kbps to 1000kbps Channel sub bands three 32MHz-wide (DIP switch select) Modulation FSK direct sequence spread spectrum* Maximum RF power output 60mW Synchronisation time less then 1.
TX/RX-EVAL FM Transmitter & Receiver Evaluation Boards These boards have been designed specifically to enable the newcomer and experienced engineer alike to get a feel for the capabilities for each radio data module under both laboratory and field conditions. Their features provide an invaluable means for conducting range tests and for assisting in installation and the alignment of antenna. The TX-EVAL transmitter evaluation kits permit the evaluation of and testing of all the TXM series transmitters.
BIM-4xx-DEV Transceiver Evaluation/Development Kit Exclusively designed for the evaluation of the BIM-418-F, BIM-433-F or BIM-433-HP transceiver modules. The BIM-4xx DEV is the ideal starting platform for those wishing to instantly evaluate the potential of the BIM transceiver, and eliminate the need to get involved in PCB or software design to do so.
1CH-4xx-HT FM Receiver Module Remote Control Platform This 1 channel receiver platform is intended to complement the TXM series transmitter modules. It is based on the HT-12-D decoder circuit and the SILRX or RXM series receiver modules. With open collector alarm and low battery outputs, it provides the basis for a wide variety control applications. The triggered condition, for example an alarm condition, is visible via a red LED and a green LED for a transmitter low battery condition.
1CH-4xx-HTLP FM Receiver Module Low Power Platform The 1CH-418/433-HTLP is a low power radio receiver platform designed to accommodate the SILRX range of receiver modules and to operate in conjunction with a transmitter design employing the TXM series FM transmitter module, together with the Holtek HT-12-E encoder IC. The unit has been specifically designed to operate at very low current levels, permitting its retro-fit to any system without the need for increased power supply capacity.
1,2 & 4CH-SRX Four Channel Remote Control Receiver Platform The 1,2 & 4CH-SRX platforms provide one, two or four independently binary coded output channels. Each relay ouput is user configured through jumper settings to select either latched mode or pulsed mode. The four bit address for each output channel is user configured by means of SIP switches. The power supply input and channel output connections to external equipment are made via screw terminal connector blocks.
1-6CH-TXM One to Six Channel FM Remote Control Platform 116 x 70 x 23 mm DESCRIPTION Available in 1 to 6 button versions, the 1-6CH-TXM remote control platform is designed to accommodate the TXM-4xx-A or HP FM transmitter modules. An 8bit address SIP switch configures the platform for 1 of 256 possible address codes.
Portable antenna are supplied with BNC connectors as standard. Other connectors or screw fittings may be supplied to order.
TXM-CASES Keyfob Cases for FM or AM Transmitter Modules Ergonomically designed cases available in 1,2,3,4,5 and 6 button formats. Each button is colour coded for clear function distinction. The buttons maintain the profile of the box so that ‘catching’ is eliminated. Suitable for use with the our TXM and AM-TX1 range of transmitter modules and will accommodate a 12V alkaline type 23A battery. Above the buttons is an aperture for a 3mm LED.
High or low volume, we welcome all orders. A one-off is never a problem ! To place your order • • • Call: Fax: e-mail +(416)236-3858 9am - 7pm EST +(416)236-8866 24Hrs abacomtech@compuserve.com For your convenience a fax/mail order form is included in this catalog.
TO: ABACOM TECHNOLOGIES 32 Blair Athol Crescent Etobicoke, ON, M9A 1X5 CANADA FROM: TEL: +416-236-3858 FAX: +416-236-8866 Tel: Fax: First Name: Last Name: Company: Mailing Address: Shipping Address: ORDER CODE DESCRIPTION Payment Method: VISA Signature: PRICE Subtotal MasterCard International Money Order S&H 7.
US $ ITEM PRICE LIST 1+ 20+ 50+ 24.50 25.80 25.80 10.15 12.10 12.60 87.15 20.90 21.88 21.88 7.75 8.30 10.90 82.00 17.32 17.92 17.92 6.70 7.38 9.50 76.86 50.83 39.38 41.92 24.50 10.95 10.95 10.95 105.52 40.16 34.10 36.75 22.40 9.65 9.65 9.65 99.30 35.40 29.75 31.95 17.75 7.60 7.60 7.60 93.10 87.36 139.30 139.30 247.90 139.30 195.00 12.50 313.50 699.30 72.41 122.36 122.36 229.40 122.36 61.10 104.95 104.95 218.67 104.95 11.35 295.75 665.00 10.50 260.75 605.