Specifications

Abacom Technologies •• 67 Hamptonbrook Dr •Etobicoke • ON • M9P 1A2 • Tel: [phone] • Fax: [phone]
BIM-4xx-F TRANSCEVER MODULE
Absolute maximum ratings
Supply voltage Vcc, pin 17 -0.1 to +6 Volts
All input / output pins -0.1 to Vcc + 0.1 Volts
Operating temperature -20°C to +55°C
Storage temperature -40°C to +100°C
Performance Data
ambient temperature: 20°C
supply voltage: +5.0 volts, unless noted otherwise
Data applied to all frequency versions, except where noted.
Parameter Min Typ. Max. Units Notes
DC Parameters
Operating supply range, Vcc 4.5 - 5.5 volts -
Supply current, transmit
receive
loop test
stand-by
8
10
-
-
12
12
20
-
15
16
25
1
mA
mA
mA
µA
-
-
-
-
RF Parameters - Transmit
Radiated power (ERP) -10 -6 -3 dBm 1
Transmit frequency (BIM-418-F) - 418 - MHz -
Transmit frequency (BIM-433-F) - 433.92 - MHz -
Initial frequency accuracy -75 0 +75 KHz -
Overall frequency accuracy -95 0 +95 KHz -
FM deviation (+/-) 15 20 30 Khz -
Distortion - 5 10 % 3
Modulation response @ -3dB DC - 32 KHz -
RF Parameters - Receive
Receive frequency (BIM-418-F) - 418 - MHz -
Receive frequency (BIM-433-F) - 433.92 - MHz -
Receiver sensitivity -100 -107 - dBm -
AF bandwidth @ -3dB 0.1 - 22 KHz -
AF output level, pin 13, p-p - 400 - mV -
LO leakage, pin2 - -57 - dBm -
IF bandwidth - 200 - KHz -
AFC lock range (5µV signal)
- 200 - KHz
Timing
RX select low to valid CD - - 1 mS -
RX select low to valid RXD - - 3 mS -
Transmit to Receive delay - - 1 mS -
RF input (5µV) to valid CD
- - 0.5 mS -
RF input (5µV) to stable AF
- - 0.5 mS -