Data Sheet

227

25.000 r.p.m

113 l / min

3/8"

77 dB (A)

0.70

6.2 bar

Ø 6.0 mm

25.000 r.p.m

113 l / min

3/8"

77 dB (A)

0.90

6.2 bar

Ø 6.0 mm

Connection adapter included!

Pneumatic grinder (115° angle head)

The RUKO pneumatic grinder with 115° angle head - The compact, fast tool for deburring, poli-

shing and machining welding seams!

The RUKO pneumatic grinder has a rubberised, non-slip handle, which absorbs vibration and pro-

tects the user from slipping off whilst working. The speed can be adjusted by a governor on top

of the handle. It has a tool adapter made of hardened steel. The exhaust air is directed backwards

through the handle by means of a 360° rotational principle. The RUKO pneumatic grinder features

an integrated air filter, which protects the motor from dirt that could get into the inside with the

compressed air. The 115° angle head makes it easier to work in tight and difficult to reach places.

Pneumatic grinder (long)

The RUKO pneumatic grinder in the long design - The compact, fast tool for deburring, polishing

and machining welding seams!

The RUKO pneumatic grinder has a rubberised, non-slip handle, which absorbs vibration and pro-

tects the user from slipping off whilst working. The speed can be adjusted by a governor on top

of the handle. It has a tool adapter made of hardened steel. The exhaust air is directed backwards

through the handle by means of a 360° rotational principle. The RUKO pneumatic grinder features

an integrated air filter, which protects the motor from dirt that could get into the inside with the com-

pressed air. The tool extension makes it possible to work in tight, difficult to reach and deep places.

Ø Article no.

Pneumatic grinder (115°)

201,0 G 1/4" 116 120 L 1

Ø Article no.

Pneumatic grinder (long) 257,0 G 1/4" 116 130 L 1

Packing unit: individual cartons