Specifications
Table Of Contents
- TWO YEAR LIMITED WARRANTY
- Safety Precautions
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Optional CineWide Lens
- 3.5 Mounting the VX-2
- 3.6 Connections to the VX-2 and DHD Controller
- Connector Panel Access
- Connecting the DHD Controller to the VX-2
- Connecting Source Components to the DHD Controller
- RS-232 Controller Connection
- Connecting 12-Volt Trigger Outputs to External Theater Equipment
- Connecting to AC Power
- 4. Operation
- 4.1 Turning on the Power
- 4.2 Adjusting the Picture Orientation
- 4.3 Lens Adjustments
- 4.4 Using the On-Screen Menus
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications
- Appendix A. VX-2 Color Gamut Adjustment
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 67
PRE
L
IMINAR
Y
7.1
VX-2 Specifications
Table 7-1 lists the VX-2 specifications.
7. Specifications
Table 7-1. VX-2 Specifications
Projector Type: Digital Light Processing (DLP), 3-chip, 16:9 SuperOnyx DMD
Native Resolution: 1280 x 720 (16:9)
Aspect Ratios: Refer to Table 7-2
Video Standards: Refer to Table 7-2
DTV Compatibility: 480p, 720p, 1080i
THX recommends the use of 720p source material for optimal
performance with this product.
Scan Frequency: Horizontal: 15 - 100 kHz
Vertical: 28 - 78 Hz
Picture Size (16:9 Screen): Recommended Width: 72 - 120 in.
Maximum Width: 250 in.
Throw Distance
(Factor x Screen Width):
VX-2cx: Refer to Table 3-3
VX-2dcx: Refer to Table 3-4
Horizontal and Vertical
Offset:
VX-2cx/Proteus A: None
VX-2cx/Proteus B, C, D, E, F:
Horizontal: 10% of screen width left or right
Vertical: 80% of screen height down; 0% up
VX-2dcx: Refer to Table 3-5
Lamp: 275 Watts
Estimated Lamp Life: 2000 hours
Inputs: (1) DVI with HDCP (from DHD Controller)
Controls: Built-in keypad