Use and Care Manual

ALKYD TECHNICAL DATA IC-08
S1600 SYSTEM
INVERTED STRIPING PAINT
Form: GDH-26
Rev.: 032913
1
.DESCRIPTION AND USES .
An inverted aerosol striping paint, designed specifically for creating
crisp and clean, long-lasting lines. It is ideal for use to mark aisles, lift
truck routes, pallet positions, hazardous areas and commercial
parking lots.
These products are suitable for interior or exterior use on concrete,
grass, gravel or other types of pavement.
Meets the requirements of USDA FSIS Directive 11,000.4.
.PRODUCTS .
1627838 Blue
1648838 Yellow
1665838 Red
1691838 White
263446 Dark Blue
1677838 Black
PACKAGING .
20 fl. oz. aerosol container (18 oz. weight fill)
12 aerosols/carton
.PRODUCT APPLICATION .
SURFACE PREPARATION
ALL SURFACES: Remove loose contaminants by sweeping
the surface before application of the coating. Grease, oil and
chemical contaminants are best removed by washing the
surface with Pure Strength
®
Cleaner/Degreaser item
#3599402, commercial detergent or other suitable cleaner.
Rinse thoroughly with fresh water and allow to fully dry.
APPLICATION
Use when temperature is above 32˚F (0˚C) and humidity is
below 85% to ensure proper drying. Protect surrounding
surfaces from overspray. Overspray can carry a significant
distance.
The Inverted Striping sprays are designed for use with the
Rust-Oleum Striping Machine item #2395000. Follow machine
directions for proper use. The width of the stripe can be varied
from 2 to 4 inches wide by adjusting the position of the can
holder on the Striping Machine. For best results be sure the
Striping Machine is in motion before squeezing the trigger and
release the trigger before stopping.
The inverted striping aerosols can also be used with the
#2388000 Striping Wand.