InVision Microphone Suspensions for vibration isolation AVAILABLE IN 10 “INV” SIZES INV-1 Studio InVision Lyre
InVision www.rycote.com INTRODUCTION InVision PRODUCT RANGE The InVision ‘lyre’ suspension is the ideal answer to isolating vibrations to microphones where a discrete low profile is essential. It can be used for a wide range of ‘compact’ microphone series, ‘remote capsule’ systems and some short to medium bodied smalldiaphragm microphones. The InVision range retains all the flexibility, balance and professional performance that you can expect from a Rycote microphone suspension.
InVision www.rycote.com PRODUCT RANGE Versatile studio and boompole applications STUDIO & CONFERENCE* BOOMPOLE & STATIC INV-1, INV-2 & INV-3 are designed specifically for static use on desk & floor stands, when a discrete profile is essential. INV-4, INV-5 & INV-6 are all designed for either boompole or static use. Like the InVision 1, 2 and 3 they have the standard bar and can be used with smaller remote capsule microphones.
InVision www.rycote.com PRODUCT RANGE Versatile studio and boompole applications BOOMPOLE & STATIC BOOMPOLE & STATIC INV-9 has been designed for either boompole or static use. It has the long bar and can be used with Shure SM57 or SM58 and the Neuman KMS 105 microphones. INV-10 has been designed for either boompole or static use. It has the long bar and is specifically designed to work with the Sennheiser MKH range of microphones.
InVision InVision MICROPHONE ISOLATION Technical notes on vibration isolation MICROPHONE ISOLATION TECH NOTES The Rycote ‘lyre’ webs rely primarily on their shape to give different performance on each axis. Typically, a 100g force will barely move a microphone 1mm along the (up & down) Y axis, whereas it will move about four times that on the (left & right) X axis. In the critical Z axis, it will move something like 10 times as far.
InVision www.rycote.com TECHNICAL & ORDER INFORMATION INV-4 INV-5 INV-6 INV-7 INV-8 INV-9 INV-10 BOOMPOLE & STATIC BOOMPOLE & STATIC BOOMPOLE & STATIC BOOMPOLE & STATIC BOOMPOLE & STATIC BOOMPOLE & STATIC BOOMPOLE & STATIC Fitted with: Fitted with: Fitted with: Fitted with: Fitted with: Fitted with: Fitted with: Description: • 2 x 9.5mm clips with Standard (70mm wide) lyres, and a reducing sleeve • 1 x 20mm clip at the front and 1 x 9.
06/2008 Rycote Microphone Windshields Ltd Libby’s Drive, Slad Road Stroud Glos, GL5 1RN United Kingdom Tel + 44 (0) 1453 759338 Fax + 44 (0) 1453 764249 Email info@rycote.com www.rycote.com Rycote brochures are printed on recycled paper. Rycote is a family owned and run company and has been manufacturing microphone shock mounts and windshields for over forty years. We are very proud to say that we design, develop and manufacture all our products at our factory in Stroud, U.K.
