User Manual

InVision TECHNICAL & ORDER INFORMATION www.rycote.com
INV-9
Lyre Web Standard
Front clip 30 mm
Back clip 19-25 mm
Sleeve No
Bar size Long
ORDER CODE: 041109
INV-9
Fitted with:
• 1 x 30mm clip front & 1 x
19/25mm lyre back , on
Standard (70mm) lyres
• Large bar- 70mm (2.75”)
centres.
Suitable for following
microphones
Neumann KMS 105
Shure SM 57, SM 58
BOOMPOLE & STATIC
INV-10
Lyre Web Standard
Front clip MKH
Back clip MKH
Sleeve No
Bar size Long
ORDER CODE: 041110
INV-10
Fitted with:
• 2 x MKH Square lyres , on
Standard (70mm) lyres.
• Large bar- 70mm (2.75”)
centres.
Suitable for following
microphones
Sennheiser MKH20,
MKH40, MKH50, MKH60
BOOMPOLE & STATIC
ADAPTORS
INCLUDED
with all InVision
products.
InVision
Adaptor
specications
Description: 5/8” Female
to 3/8” Male Adaptor
Male thread: 3/8” 16 (BSW)
x Length 8.0 mm (0.315”)
Female thread: 5/8” 27 (UN)
x Depth 15.0 mm (0.590”)
Weight: 15.2 gram (0.54 oz)
Material: Brass
ADAPTOR
INCLUDED
Description:
Every InVision ts a 3/8” 16
microphone stand, and
comes supplied with a 5/8”
27 thread adaptor.
Spec below
INV-5
Lyre Web Standard
Front clip 19-22 mm
Back clip 9.5 mm
Sleeve No
Bar size Standard
ORDER CODE: 041105
INV-6
Lyre Web Standard
Front clip 19-25 mm
Back clip 19-25 mm
Sleeve No
Bar size Standard
ORDER CODE: 041106
INV-7
Lyre Web Standard
Front clip 19-25 mm
Back clip 19-25 mm
Sleeve No
Bar size Long
ORDER CODE: 041107
INV-5
Fitted with:
• 1 x 20mm clip at the front
and 1 x 9.5mm clip at the
rear, with Standard (70mm
wide) lyres
• Standard bar with
25mm (1”) centres
Suitable for following
microphones
Beyer CK930
Neumann KM 100
& KM-D series (remote)
RODE NT6
Schoeps MK w/KC active
cable, CMC w/KC active
cable, CCM Ug
Sennheiser MKH 8000
series with MZL
INV-6
Fitted with:
• 2 x 19-25mm universal
clips, with Standard
(70mm wide) lyres
• Standard bar with
25mm (1”) centres
• Maximum microphone
length 120mm
Suitable for following
microphones
AKG C 430, Bauer C2,
Behringer C2, DPA 4027, 4022,
4021, MBHO MBNM 410,
Sennheiser MKH8000 Series
w/MZX8000, Audio Technica
AT3528, AT3527, AT4053a, ES973,
ATM33a, ATM10a, AT804, PRO37,
PRO24-CM,PRO24, ATM450
M-Audio Pulsar II,
Neumann KM 100 series,
Sennheiser e906
INV-7
Fitted with:
• 2 x 19-25mm universal
clips, with Standard
(70mm wide) lyres
• Long bar with
70mm (2.75”) centres
Suitable for following
microphones
AKG ULS W/C451, C 568 EB, D130, CK63
460, CK61 C460 B, CK1 460, CK1 451, CK93
SE300 B, CK92 SE300 B, CK91 SE300 B, ULS
W/C480, ULS W/C460, Audio Technica AT
835ST, AT 825, AT 822, AT4051a, AT4049a,
AT3032, AT3031, AT4041, AT3031, AT897,
AT4073a, AT875R, AVE Stuttgart ACM 20,
Azden SMX-10, SGM-X, SGM-2X, Beyer MC
836, MCE 87vs, MC728, MC718, M69, MC713,
MC723, M201, M88, M160, MC 836, MCE 86,
ClockAudio C 850 E, DPA 4017, 4011, Eath-
works SR 20, SR 25, SR 30/4c, SR 30, Edirol
CS-50, Neumann KM 100 F, KM-D Series,
KM 185, KM 184, KM 183, KM 180 Series,
KMR-81i, Nevaton MC 401, MC 49, Oktava
MC 012, Paso MC 250, Pearl MS 2, Rode
NT5, NTG-1, NTG-2, NTG-3, Samson CL 2, CO
2, Sanken CMS 9, CMS 7, CMS 2, CUW-180,
CS-1, CS-3, Schoeps CMIT - 5U, CMC series,
CMC Series with Cut 1, Sennheiser ME80
K3U,ME66 K6, MKE 44P, ME65 K6, ME64 K6,
ME62 K6, MKH 406, MKH 416, Shure SM 81,
SM 94, VP 64AL, VP 64A, KSM 141, KSM 137,
KSM 109, Sony ECM 670, ECM 678, ECM 674,
ECM 673, ECM 680S
BOOMPOLE & STATIC BOOMPOLE & STATIC BOOMPOLE & STATIC
INV-8
Lyre Web Standard
Front clip 30 mm
Back clip 30 mm
Sleeve No
Bar size Long
ORDER CODE: 041108
INV-8
Fitted with:
• 2 x 30mm clips, with
Standard (70mm wide)
lyres
• Long bar with
70mm (2.75”) centres
Suitable for following
microphones
Neumann
RSM 191, RSM 190
Pearl MSH10
Sony ECM 999, ECM 979,
ECM 959
BOOMPOLE & STATIC
Which InVision do I need?
Visit our website to nd the InVision model for your microphone
www.rycote.com/products/invision
www.rycote.com
INV-4
Lyre Web Standard
Front clip 9.5 mm
Back clip 9.5 mm
Sleeve Yes
Bar size Standard
ORDER CODE: 041104
INV-4
Fitted with:
• 2 x 9.5mm clips with
Standard (70mm wide)
lyres, and a reducing sleeve
• Standard bar with
25mm (1”) centres
• Sleeve clips onto the
microphone connector
and the cable, leaving the
microphone casing free
to be tted with a foam
windscreen if required
Suitable for following
microphones
AKG C 747; Ambient
TinyMic, Audio Technica
AT853a, PRO45, AT831b,
AT803b, PRO35, PRO70,
ATM350, ES933, DPA 4053,
4052, 4036, 4033, 4028,
4023, MBHO KA Series
w/MBP 648A, Milab VM-44
Schoeps CCM (Lemo)
Sennheiser ME36
BOOMPOLE & STATIC
Which InVision do I need?
If a xed discrete prole is essential, use the STUDIO INV-1, INV-2 & INV-3
If boompole use is required, choose the BOOMPOLE & STATIC INV-4 to INV-10