Owner`s manual

Rydeen GPS Configurations
33
GPS Settings
From the Settings menu, Tap the “GPS
Signal” button to display GPS
information and to configure the GPS
connection settings.
Rydeen GPS receives data from a built-in
GPS receiver or an external GPS receiver,
connected to your Navigation device, to
pinpoint your location. Your vehicle's
location and position are constantly
updated unless you are working in the
Free Browse Map mode or you tap the
GPS Off button. The GPS receiver may
take a few minutes to find its initial
location. For best results, ensure that the
GPS receiver has a clear view of the sky.
The GPS Signal screen displays the following information:
 Longitude
 Latitude
 Speed
 Altitude
If you are working in the Free Browse Map mode, Rydeen GPS automatically
disconnects from the GPS receiver.
Tap the Set button to configure the Connection fields.
GPS Troubleshooting
Signal too low
When you first start Rydeen GPS you may hear the "Signal too low" message.
This message means that your navigation device has not yet located a reliable
GPS signal.
Tap
Figure 31 – GPS Setting