Manual

NOTE:Yourunitiscompletelyassembledasablowerin

thecarton.Usethefollowinginstructionsto

convertbetweenablowerandavacuum.

_i ARNING: To avoid serious personal injury

and damage to the unit, shut unit off before

removing or installing add-ons.

CONVERTING TO A VACUUM

1. Loosen the clamping knob on the blower housing

counterclockwise.

2. Remove the blower tube.

3. Install the bag elbow and tighten the knob clockwise.

(Fig. 1)

Elbow

I /

I.r/"

Vacuum Bag

Fig. 1

4. Fasten the strap to the shaft above the assist handle,

located on the powerhead. (Fig. 2)

Strap

(

CONVERTING TO A BLOWER

1. Remove the vacuum bag.

2. Clip the blower tube to the end of the vacuum tube.

(Fig. 3)

J Vacuum Tube

/ Clip

Fig. 3

3. Install the blower tube and tighten the knob. (Fig. 4)

Knob

Blower Tube

Fig. 4

Fig. 2