Operating instructions

Page 106 Power Equipment Usage Manual (Rev. 5/10)
21.2.4. Changing Router Bits
a. Press spindle lock to prevent rotation of collet chuck. NOTE: it may be necessary to rotate collet
nut to engage spindle lock (Fig. 3).
b. Next, use the collet wrench to loosen the collet chuck assembly in counter-clockwise
c. direction (viewed from bottom of router).
d. Insert the shank of the router bit into the collet chuck assembly as far as it will go, then back the
shank out until the cutters are approximately 1/8" to 1/4" away from the collet nut face.
e. With the router bit inserted and the spindle lock engaged, use the collet wrench to firmly
tighten the collet chuck assembly in a clockwise direction (viewed from bottom of router).