OPERATOR’S MANUAL 18 VOLT BLOWER P2100 P2100A P2100B ACCEPTS ALL one+ BATTERY PACKS Batteries & Chargers Sold Separately Your blower has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase.
TABLE OF CONTENTS Introduction...................................................................................................................................................................... 2 Important Safety Instructions........................................................................................................................................ 3-4 Symbols.................................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS Do not operate blower with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger replaced by an authorized serviceman. Stay alert, watch what you are doing and use common sense when operating a power blower. Do not use blower while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating blowers may result in serious personal injury. Dress properly.
IMPORTANT SAFETY INSTRUCTIONS Know your power blower. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this blower. Following this rule will reduce the risk of electric shock, fire, or serious injury. Do not charge blower battery in a damp or wet location. Following this rule will reduce the risk of electric shock. Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
FEATURES PRODUCT SPECIFICATIONS Weight............................................................................................................................................................................. 5 lbs. Motor.......................................................................................................................................................................18 Volt DC Air Velocity: MPH.............................................................................................
ASSEMBLY UNPACKING WARNING: This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance.
OPERATION This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs. TOP VIEW For complete charging instructions, refer to the operator’s manual for the P113 charger. For battery pack instructions, see the manual for the P104 lithium-ion battery pack or the P100 nickel-cadmium battery pack. power switch STARTING/STOPPING THE BLOWER See Figure 3. To start the blower, place the power switch in the ON ( l ) position.
OPERATION WARNING: Battery tools are always in operating condition. Therefore, switch should always be in the OFF position when not in use or carrying at your side. OPERATING THE BLOWER See Figure 5. n To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile. n To reduce sound levels, limit the number of pieces of equipment used at any one time. n Use rakes and brooms to loosen debris before blowing.
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: WARNING: Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc.
WARRANTY LIMITED WARRANTY STATEMENT A. Tune-ups – Spark Plugs, Carburetor, Carburetor Adjustments, Ignition, Filters B. Wear items – Bump Knobs, Outer Spools, Cutting Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades, Blower Fans, Blower and Vacuum Tubes, Vacuum Bag and Straps, Guide Bars, Saw Chains Techtronic Industries North America, Inc.
NOTES 13
OPERATOR’S MANUAL BLOWER P2100 P2100A P2100B • Parts and Service Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL NUMBER • SERIAL NUMBER P2100/P2100A/P2100B • How to obtain Replacement Parts: Replacement parts can be purchased online at www.ryobitools.com or by calling 1-800-860-4050. Replacement parts can also be obtained at one of our Authorized Service Centers.