Instructions

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
5
Original Instructions
ENGLISH
Ŷ Do not remove or deface
warning labels on the product.
Ŷ Do not disassemble the
product.
Ŷ Avoid heavy impact to or
dropping of the laser. The
accuracy of the laser should
be checked before use if it has
been dropped or subjected to
other mechanical stresses.
Ŷ Do not operate the product in
explosive areas or in extreme
environments.
Ŷ When not in use, make sure to
turn off the power, and place
the laser in its carrying pouch.
Make sure the on/off switch
is in the off position before
transporting the laser.
NOTE: If the on/off switch is
not in the off position before
transportation, internal
mechanical damage may
occur.
Ŷ If the product is not in use for
a long period of time, remove
the batteries from the battery
compartment. This will prevent
batteries from leaking and
corrosion.
KNOW YOUR PRODUCT
See page 84.
1. Vertical laser beam window
2. 360° horizontal laser beam
window
3. Self-levelling LED indicator
4. Mode selector
5. Battery door
6. ON/OFF switch
7. Mounting screw hole(1/4”)
8. Battery
9. Storage pouch
10. Operator’s manual
SELF-LEVELLING LED
INDICATOR
LED
indicator
Explanation
Green
Self-leveling is
complete.
Red
Self-leveling is not
successful; laser
line blinks. Place
the product in a
horizontal position
of +/-
4°.
MAINTENANCE
Ŷ Avoid using solvents when
cleaning plastic parts. Most
plastics are susceptible to
various types of commercial
solvents and may be damaged
by their use. Use clean cloths
to remove dirt, carbon dust,
etc.
Ŷ For greater safety and
reliability, all repairs should be
performed by an authorised
service centre.
SYMBOLS ON THE
PRODUCT
Safety alert
V Volts
Direct current