Use and Care Manual

Page 26 — English
CLUTCH
COVER
BAR MOUNTING NUTS
Fig. 33
GUIDE
BAR
SPROCKET
CLUTCH DRUM
MAINTENANCE
Fig. 31
RUN
POSITION
BAR MOUNTING NUTS
COMBINATION
WRENCH
Fig. 32
BAR
GROOVE
CHAIN DRIVE LINKS
Fig. 35
CUTTERS
CHAIN ROTATION
CHAIN DRIVE LINKS
Fig. 34
REPLACING THE GUIDE BAR AND
CHAIN
See Figures 31 - 40.
DANGER:
Never start the engine before installing the guide
bar, chain, drivecase cover, and clutch drum.
Without all these parts in place, the clutch can
fly off or explode, exposing the user to possible
death or serious injury.
WARNING:
To avoid serious personal injury, read and
understand all the safety instructions in this
section.
Stop the engine and disconnect the spark plug
wire before you work on the saw.
Make sure the chain brake is not set by pulling
the chain brake lever/hand guard towards the
front handle to the run position.
NOTE: When replacing the guide bar and chain,
always use the specified bar and chain listed in