Use and Care Manual

7 - English
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and understand opera-
tor’s manual before using this product.
Wear Eye, Hearing, and
Head Protection
Wear eye protection with side shields marked to comply with
ANSI Z87.1 as well as hearing and head protection when operat-
ing this equipment.
Wet Conditions Alert
Do not expose battery, battery compartment, or electronic
components to rain, water, or liquids. Do not charge battery or
expose product to rain or damp locations.
Rain Symbol Do not expose to rain.
Operate With Two Hands Hold and operate the saw properly with both hands.
One Handed Do not operate the saw using only one hand.
Kickback DANGER! BEWARE OF KICKBACK.
Bar Nose Contact
Avoid bar nose contact. Tip contact may cause the
guide bar to move suddenly upward and backward,
which may cause serious injury.
Wear Gloves
Wear non-slip, heavy-duty protective gloves when handling the
chainsaw.
Wear Safety Footwear Wear non-slip safety footwear when using this equipment.
Oil Indicator
Pour bar and chain lubricant into oil tank where indicated. Do not
use any other fluids.
Recycle Symbol
This product uses lithium-ion batteries. Local, state or federal laws
may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available recycling
and/or disposal options.
V
Volts Voltage
Direct Current Type or a characteristic of current
SYMBOLS