Use and Care Manual

9 - English
FEATURES
PRODUCT SPECIFICATIONS
Motor .................................................................. 40 Volt DC
Bar Length
...................................................................20 in.
KNOW YOUR CHAINSAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
CHAIN TENSIONING SCREW
This feature allows user to adjust the tension of the chain.
CHAIN BRAKE / FRONT HAND GUARD
The chain brake is designed to quickly stop the chain from
rotating. When the chain brake / front hand guard is pushed
toward the bar, the chain should stop immediately. The chain
brake does not prevent kickback.
GUIDE BAR
The factory-equipped guide bar has a small radius tip that
offers a somewhat lower kickback potential.
LOCK-OUT BUTTON
A control feature designed to prevent the motor from being
accidently started.
LOW KICKBACK CHAIN
The low kickback chain helps minimize the force of a kick-
back reaction by preventing the cutters from digging in too
deeply at the kickback zone.
QUICK VIEW OIL INDICATOR
Semi-transparent oil reservoir that allows user to see when
to add oil.
SPIKED BUMPER
Factory equipped metal teeth for use when felling or bucking
to pivot the saw and maintain position while sawing.
SWITCH TRIGGER
Squeeze the switch trigger to operate the unit after switch
lock-out has been pushed in. Release the switch trigger to
stop the unit.
ASSEMBLY
PACKING LIST
Chainsaw with Scabbard
Combination Wrench
Carrying Case
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
NOTE: This saw was designed for occasional light duty use and has some limitations as to what it can cut.
Chain oil tank capacity
.................................................7 oz.
Chain speed
............................................................. 19 m/s