Datasheet

The ceiling-built-in motion sensor and presence detector KINASGARD
®
DBWF ⁄ DBWF-C detects the presence of persons and movements and has
a switching contact as an output. It is used for monitoring and detecting statuses and for motion-dependent control of room functions, e.g. for lowering
the temperature of unused rooms. The ceiling motion sensor is used for installation in suspended ceilings in corridors, offices, as well as in residential
and business facilities. The connecting head is pluggable for quick, easy mounting. The measuring transducer is accommodated in a separate enclosure.
The sensor detects motions over an aperture angle of 110° and a perimeter of 360°. The patented lens system with 20 individual lenses results in only
very small dark areas that are only a few centimetres wide even at a distance of 10 m, thereby reliably detecting small movements.
TECHNICAL DATA
Power supply: 24 V AC (± 20 %); 15...36 V DC
Power consumption: < 1 W at 24 V DC; < 2 VA at 24 V AC
Sensor: infra-red motion sensor
Detection range: perimeter 360°, aperture angle 90° ⁄ 110°,
reach approx. 10 m, circular, at an installation height of approx. 3 m
the sensor covers a detection radius (r) of approx. 3.4 m
Motion detection: of persons and objects, necessary temperature difference between subject and surroundings ≥ 5 K
After-running time: adjustable from 4 seconds to 16 minutes
Ambient temperature: –10...+50 °C
Connecting head: plastic, material polycarbonate (PC), colour white,
pluggable
Connecting cable: PVC, LiY Y, 4 x 0.14 mm²,
KL = approx. 2 m (other lengths optional)
Electrical connection: 0.14 - 1.5 mm² via terminal screws
Mounting (sensor): in the suspended ceiling, ceiling cutout Ø = 30 mm,
cover Ø = < 35 mm
Protection type (sensor): IP 30 (according to EN 60 529)
Protection class (sensor): III (according to EN 60 730)
Standards: CE-conformity, electromagnetic compatibility
according to EN 61 326, EMC Directive 2014 ⁄ 30 ⁄ EU
DBWF measuring transducer
Output: potential-free changeover contact (24 V), 1 A ohmic load
Enclosure: plastic, material polyamide, 30 % glass-globe reinforced,
with quick-locking screws (slotted ⁄ Phillips head combination), colour traffic white (similar to RAL 9016)
Enclosure dimensions: 72 x 64 x 37.8 mm (Tyr 1)
Cable gland: M 16 x 1.5; including strain relief, exchangeable,
max. inner diameter 10.4 mm
Protection type (enclosure): IP 65 (according to EN 60 529)
DBWF-C measuring transducer
Output: potential-free normally open contact , signal relay, max. 24 V ⁄ 0.5 A
Enclosure: plastic, material PVC, colour black
Enclosure dimensions: 55 x 20 x 15 mm (compact form)
Protection type (enclosure): IP 20 (according to EN 60 529)
G
KINASGARD
®
DBWF ⁄ DBWF - C Rev. 2017 - V20 GB
KINASGARD
®
DBWF – Ceiling built-in motion sensor
KINASGARD
®
DBWF - C – Ceiling built-in motion sensor, compact form
Type ⁄ WG01 Detection
Presence + Movement
Output
Presence + Movement
Item no.
DBWF
DBWF-W Yes ⁄ No (relay on ⁄ off) Changeover contact 1401-6120-3000-000
DBWF-C
DBWF-C Yes ⁄ No (relay on ⁄ off) Normally open contact 1401-6130-1000-006