User's Manual
WTS
22
Installation
8875 801-267
4.2 Antenna installation
There are two alternatives for installation of the antennas.
• Centralized installation for when the WCU has been installed
externally.
• Spread out installation for when the WCU has been installed
internally.
Centralized installation
1 Place the antennas on the magnetic area on top of the WCU.
2 Connect the cables to the WCU, see 4.5 Cable installation.
3 Strap any excess cable length to the ratchet belts that hold the
WCU in place.
Fig 11. Example of a centralized antenna installation
Spread out installation
1 Place the antennas according to the picture below.
2 Route the cables inside the vehicle to the WCU.
3 Secure the cables with straps.
4 Connect the cables to the WCU inside the vehicle, see 4.5 Cable
installation.
© Saab Training Systems