User's Manual

WTS

Installation

8875 801-267

4.3 WDU installation

1. Lift the rubber cover on the WDU and push down the battery.

Fig 13. Battery installation

WDU

2. Put the rubber cover back on. Make sure it seals tight on the back

of the WDU.

3. A green LED indicates that the battery is OK.

4. Push the button and check the vehicle symbol on the WDU. A red

LED will indicate where on the vehicle the WDU should be

installed

- front, rear, left or right.

Fig 14. WDU installation

LED