User's Manual

WTS
6
6 Removal
6.1 Remove WDU from system
1. Hold the WDU above the WCU and push the button on the WDU
once. Make sure the WDU can send IR light to the WCU.
Fig 26. WDU removal
6.2 Remove all WDUs from system
1. For OSAG: Select the commands ACCESS + ACCESS + RESET
on the CGUN. Aim at the target system and fire the CGUN to
remove all WDUs from the system.
2. For MILES: Select the commands CTRL + CTRL + RESET on the
CGUN. Aim at the target system and fire the CGUN to remove all
WDUs from the system.
© Saab Training Systems
8875 801-267 Removal 39