User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 11 (98)
Section 5, Monitor, contains information about the alarm and status monitoring
functions that are built into the web GUI.
Section 6, Configure, contains information about all R60 Station parameters and how
to configure them.
Section 7, Maintenance, describes how to upgrade the firmware and software of the
R60 Station.
Section 8, Supervisor Web, describes the specific functions provided by the Supervisor
Web GUI of the R60 Station.
Section 9, SNMP Monitoring, describes the SNMP functionality as supported by the
R60 Station.
Section 10, NMEA sentences, describes additional features of the R60 related to
NMEA interface sentences, in addition to the NMEA/IEC standards.
Section 11, Technical data, contains technical characteristics of the R60 Station.
Section 13, ACROnyms, contains brief descriptions of acronyms used in this document.
1.2 References
Ref [1] R60 VDES Base Station Installation Manual
Document number: 7000 120-008
Ref [2] Technical characteristics for a universal ship borne automatic identification
system using time division multiple access in the VHF maritime mobile band
Document number: ITU-R. M. 1371-5
Ref [3] IALA guidelines on the universal automatic identification system (AIS)
Document number: IALA Ed 1.1
Ref [4] IALA recommendation on AIS shore stations and networking aspects related
to the AIS service
Document number: IALA A-124. Ed. 2.1
Ref [5] Maritime navigation and radio communication equipment and systems –
Automatic identification systems (AIS)
Part 1: AIS Base Stations - Minimum operational and performance
requirements, methods of testing and required test results
Document number: IEC 62320-1 Ed.2
Ref [6] Maritime navigation and radio communication equipment and systems –
Automatic identification systems (AIS)
Part 2: AIS AtoN Stations – Operational and performance requirements,
methods of testing and required test results
Document number: IEC 62320-2 Ed.1