User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 26 (98)
3.7 Visual appearance of the web interface
When comparing pictures in this manual to the view on your screen, be aware that by
changing the size of the web browser window the web page content is re-arranged.
The web page will automatically adapt and try to display as much information as
possible in the available area. The content on your screen can therefore appear in a
different position compared to the illustration in this manual.
The web browser used may also result in minor variations.
3.8 Saving parameter changes in the web interface
When changing a parameter or setting in the R60 web GUI, a button named Save
Changes appears in the upper right corner of the browser window. Please be aware
that changes are not stored and will not have any effect on the unit until this button is
used.
When clicking on the Save Changes button the changes are stored in the R60 memory.
The settings will take effect immediately, i.e. it is not necessary to reboot the base
station.
Figure 3-6: Make sure to use the Save Changes button to store changed settings
All unsaved changes are abandoned when the present (web) page is left for another
page, so be careful to save changes before changing page.
If a parameter is changed by mistake and the original setting is unclear, all unsaved
settings changes on the page can quickly be made undone by simply leaving the page
(e.g. by moving one level up in the category hierarchy or to another web page on the
same level) and then go back to the page again and start over.
3.9 Introduction to main categories
The web interface of the R60 Station contains four main categories as detailed in
section 3.5. This section contains brief introductions to these main categories.