User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 27 (98)
3.9.1 HW/SW Info
The category HW/SW Info is used to display version information about various
software, firmware and hardware in the R60 unit. It also lists which licensed features
are enabled.
Further details are found in section 4.
3.9.2 Monitor
The category Monitor is used to display unit status, unit alarms and position reports.
More details about the monitoring features is found in section 5.
3.9.3 Configure
The category Configure is used to check or change settings in the R60 Station. Settings
that can be changed are for instance communications interface capabilities, VDL data
link and other AIS features, clock reference sources, etc.
More detailed information about base station settings, and how to edit them, is found
in section 5.5.
3.9.4 Maintenance
The category Maintenance is used to upgrade the unit software and/or firmware,
power cycle the base station and import/export/restore the configuration.
To enable the R60 to be integrated into third party SNMP monitoring tools, the SNMP
MIB definitions text file can also be downloaded here.
More details about how to perform the maintenance tasks is found in section 7.