User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 30 (98)
Figure 3-8: General, sub-page of the Configure category
Set up the parameters as described in section 6.3 on page 49. Normally, only
the MMSI needs to be changed.
7. If you changed any parameter on the General page now is the time to save the
changes to the base station by clicking on the Save Changes button that
appears in the upper right corner of the page.
8. Leave the General category and move to the GNSS settings category. Since the
General and GNSS sub categories are in the same main category group
(Configure), the fastest way to do this is to move the cursor to hover over (or
click on) the General text in the navigation line, and in the menu that appears
click on the GNSS sub-category (see Figure 3-9).
The GNSS page appears (Figure 3-10).