User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 35 (98)
You must reserve at least the slots that the scheduled FATDMA messages
occupy.
Please note the settings displayed in Figure 3-12 are provided as an example
only and should not be used as a reference for your application. Refer to
section 6.8, for a more detailed description about the settings on this page.
13. If you changed any parameter on the Data Link Management page now is the
time to save the changes to the base station by clicking on the Save Changes
button that appears in the upper right corner of the page.
14. Leave the Data Link Management category and move to the Network settings
category. A page similar to Figure 3-13 should appear.
Figure 3-13: Network page
Set up the parameters as required. Normally, only the IP settings need to be
changed.